LAUSR

This study provides the results of investigation on scaling approaches for three differently-sized continuous granulation lines, each consisting of a twin screw wet granulation process and a continuous fluid bed drying process. To check the initial scaling approach with regard to granule and tablet properties, a process parameter Design of experiment (DoE) was performed on each of the three equipment scales. The processed formulation did not contain cellulose to allow a high overall flowrate through the directly connected granulation and drying sections. Enhanced scaling aspects showed the influence of Froude number [-] at different twin screw granulator scales and screw speeds on the overgranulated particle fraction [% (V/V] as well as on the scale-dependent drying performance of the continuous fluid bed dryers. Scale-independent, specification limits of the two granule material attributes particle fine fraction [%] and residual water content [%] could be defined, resulting in high tableting performance in terms of tabletability and compressibility. Based on these specification limits and the statistical evaluation of the process parameter DoE, a process design space for the continuous granulation and drying process for each scale was calculated. It came up, that this process design space was decreasing in range with increasing equipment scale.The applicability of the presented scaling approach in terms of granule and tablet properties could successfully be demonstrated by three control experiments performed on the different equipment scales. In sum, this work delivers a basis for a smooth transition of scales within process development on the investigated continuous twin screw granulation and drying lines.