LAUSR

Abstract Ternary Cu2SnS3 (CTS) thin films have attracted lots of attention due to its low cost, nontoxic element for solar cell. However, Tin losses always happen during sulfurization, which will affect the phase purity and morphology of CTS thin films and relevant solar cell. In this work, a low cost oxides route was used to prepare CTS thin films. The influences of sulfurizaton temperature on the crystal structure, morphology and composition were studied carefully. From the XRD, SEM and EDX results, it was found that the stable oxides were conducive to alleviate the Sn loss even at the higher sulfurization temperature (580 °C). Meanwhile, the crystal structure evolution along annealing temperature was also observed from mixed phase (Monoclinic and Tetragonal) to single phase Monoclinic. The Monoclinic CTS thin films sulfurized at 580 °C were used to fabricate CTS solar cell with Mo/CTS/CdS/ZnO/AZO/Ag structure, exhibiting efficiency of 0.16%. The comparable Voc of 300 mV was achieved by benefiting from the precise composition control. Besides, the photoelectric properties of the device were carefully studied as well. This study provides a low-cost and facile strategy for the fabrication of Sn-loss free CTS solar cells.