LAUSR

Abstract The recently developed Refractory Metal High Entropy Superalloys have the potential to replace Ni-based alloys in very high temperature structural applications. However, the microstructures of these new alloys typically consist of refractory metal based solid solution precipitates within an ordered superlattice structured matrix, which is likely to compromise key properties such as toughness. As such, there is significant interest in inverting this arrangement, such that superlattice precipitates form within a disordered refractory metal matrix. Yet the mechanisms by which these microstructures form and how they might be modified with compositional variations are currently unclear. To elucidate these mechanisms, the microstructural evolution of a series of compositionally simpler alloys from the Ti–Ta–Zr system have been studied following long term exposures at 700, 900 and 1000 °C. Exposures of up to 1000 h were used as a proxy to equilibrium and the resulting microstructures were analysed using advanced scanning and transmission electron microscopy methods. The microstructures of these alloys were found to predominantly contain one or two bcc phases, the lengthscale and morphology of which changed with exposure temperature. From these results it is established that the fine-scale microstructure, which is very similar to that widely reported in the more compositionally complex refractory metal high entropy superalloys, forms via spinodal decomposition during cooling. It is also shown, for the first time, how compositional modification can lead to a refractory metal solid solution based matrix. It is believed that these results provide key insights that can guide further development in the more complex systems that will be required for commercial applications.