LAUSR

Abstract NiTi shape memory alloys (SMAs) have been widely applied in biomedical fields due to their excellent shape memory effect, super-elasticity, and biocompatibility. In this study, the plasma- enhanced atomic layer deposition was applied to deposit TiO2 film on the surface of Ni50Ti50 substrate. The characterization and surface properties of TiO2 film, bending strain test, corrosion resistance, nickel release and in vitro biocompatibility were studied to evaluate the performance of ALD-TiO2 film. The results show that the ALD-TiO2 film is uniform and exhibits an amorphous structure. The ALD-TiO2 films are less hydrophilic than the Ni50Ti50 substrate. As the deposition cycle increases, the water contact angle of ALD-TiO2 film only changes slightly. The ALD-TiO2 film exhibits an adequate adhesion to the Ni50Ti50 substrate and can withstand proper bending strain. ALD-TiO2 film can effectively inhibit the release of nickel ions. After being immersed in the simulated body fluid for 30 days, the amount of nickel ions released decreases from 60 ppb for Ni50Ti50 substrate to 20–20 ppb for Ni50Ti50 with 200-cycle ALD-TiO2 film. Meanwhile, Ni50Ti50 with ALD-TiO2 films have better corrosion resistance than the Ni50Ti50 substrate. In vitro biocompatibility reveals that the ALD-TiO2 film can enhance cell adhesion, promote cell proliferation and reduce cytotoxicity. After 5 days of culture, the 200-cycle ALD-TiO2 film can enhance the cell proliferation by 2.7 times and reduce the cytotoxicity from 48% for Ni50Ti50 substrate to 37% for Ni50Ti50 with 200-cycle ALD-TiO2 film. These results indicate that the TiO2 films deposited by PE-ALD technique can effectively improve the biocompatibility of NiTi SMAs.