Abstract A stable thermal field and a controlled convex growth interface are essential for the stable growth of large-size CdZnTe crystals by the Traveling Heater Method (THM). However, the crucible… Click to show full abstract
Abstract A stable thermal field and a controlled convex growth interface are essential for the stable growth of large-size CdZnTe crystals by the Traveling Heater Method (THM). However, the crucible wall temperature always increases due to the deposition of CdZnTe crystals with low thermal conductivity at the bottom of the crucible. A comprehensive two-dimensional simulation model for THM growth of CdZnTe is developed and implemented to study the heat and mass transfer. The effect of increasing wall temperature on interface shape and concentration distribution is discussed. Experimental results show that a dummy crystal with a thermal conductivity similar to that of the CdZnTe crystal helps to stabilize the wall temperature. In a stable thermal field, low constant rotation is assumed to be sufficient to weaken natural convection flow and to make the interface convex in THM. Simulation results show that low constant rotation rates of 2.5 RPM for 2-inch crystal and of 1.25 RPM for 3-inch crystal are effective in interface optimization. Several ingots with a diameter of 2 inches and 3 inches were grown by unseeded THM. Convex interfaces were observed both in 2-inch and 3-inch crystals by applying simulated rotation rates after fast cooling.
               
Click one of the above tabs to view related content.