LAUSR

Abstract In this study, we investigated how the geometric design of anodic one-dimensional (1D) TiO2 nanotube arrays affected their performance in the electrochemical reduction of 2,4,6-trinitrotoluene (2,4,6-TNT) in aqueous solutions and ambient conditions. Two main geometric parameters were considered: the inner diameter and length of TiO2 nanotubes. The various TiO2 nanotubes were fabricated using an anodization technique performed in four types of fluoride-containing organic solvents by adjusting various anodization parameters. All as-prepared samples successfully detected 2,4,6-TNT in an aqueous solution using cyclic voltammetry and linear sweep voltammetry. Three peaks corresponding to the reduction of each nitro group in 2,4,6-TNT were observed between − 0.5 and − 1.0 V (versus Ag/AgCl, 3 M KCl). Further, we discovered that nanotube length affected 2,4,6-TNT reduction performance. We also performed experiments at various concentrations of 2,4,6-TNT and determined the sensitivity to be 1.78 × 10-3 mA cm−2 ppm−1, the limit of detection to be 6.49 ppm, and the limit of quantitation to be 21.6 ppm 2,4,6-TNT over a linear range of 20 – 100 ppm using an electrode with nanotube inner diameter of 75 nm and length of 6 µm. A simple and fast fabricated composite-free 1D TiO2 nanotube arrays electrode can form the basis for future studies in enhancing the detection sensitivity. Electrochemical detection of other nitro-based compounds, such as nitroglycerin, nitrocellulose, picric acid, and their mixtures, require further investigation.