LAUSR

Abstract To investigate the densification of porous alumina plugs, hydrogen measurements, using the Hydris probe system, were performed in molten steel with different oxygen levels at around 1600 °C. The oxygen contents in molten steel were controlled by Al and Fe-Si alloy additions to 664, 296, 92, 51 and 2.5 ppm, respectively. High oxygen levels (> = 92 ppm) in molten steel were found to favor the infiltration of steel into porous alumina plug. The infiltrating steel interacts with SiO2-containing phases and Al2O3 inside the plug, forming liquid FeOn-Al2O3-SiO2 slag and FeAl2O4 (hercynite). These newly formed phases, along with the infiltrating steel fill the porous structure of the alumina plugs. As a result, severe densification was observed inside the alumina plugs in contact with molten steel containing high oxygen levels. In comparison, no densification occurred in the plugs contacting with the steel having low oxygen contents of 51 and 2.5 ppm.