LAUSR

Abstract Taking advantages of reaction composite brazing, transient liquid phase bonding (TLP) and partial transient liquid phase bonding (PTLP), a novel process with the characteristics of low-temperature bonding and high-temperature resisting was developed for joining Cf/SiC composite to GH3044 alloy by using (Cu-Ti) + C + Ni mixed powder filler. Under the bonding temperature (980 °C), the reaction between the liquid Cu-Ti alloy and C particles (reaction composite mechanism), composition homogenizations between the joining layer and Ni particles (PTLP mechanism) as well as Ni-based substrate (TLP mechanism) occurred to complete the transformation (Cu,Ti)l + Cs + Nis → TiCs + (Cu,Ni)s. Thereby, a joint with high-temperature resistance and excellent mechanical properties was obtained in relatively short holding time. The melting-point of the joint (1050 °C) was obviously higher than that of Cu-Ti alloy (898 °C) in the filler. The bonded joints exhibited shear strengths of 229, 225 and 104 MPa at room temperature, 600 °C and 1000 °C, respectively.