As more and more microplastics (MPs) and triclosan (TCS), which are added in consumer products, enter wastewater treatment plants with sewage, there are concerns about the impacts of the co-occurrence… Click to show full abstract
As more and more microplastics (MPs) and triclosan (TCS), which are added in consumer products, enter wastewater treatment plants with sewage, there are concerns about the impacts of the co-occurrence of MPs and TCS on biological wastewater treatment. In this study, the co-effects of four 1 mg/L MPs (polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC) and polyamide (PA)) and 0.5 mg/L TCS on nitrification were investigated in lab-scale nitrifying sequencing batch reactors (SBRs) (SBR-PE, SBR-PS, SBR-PVC and SBR-PA) relative to control which received no MPs (SBR-CK). The removal rates of NH4+-N and TCS in SBR-CK were around 100% and 92%, respectively. Compared with SBR-CK, no measurable inhibition was observed on nitrification in SBR-PE and SBR-PS, however, SBR-PVC and SBR-PA rapidly lost nitrification function during 14 days, which might be due to the reducing of MLSS caused by PVC, PA and TCS co-loading. Furthermore, PS, PVC and PA decreased the removal of TCS. The co-occurrence of TCS and PS, PVC, PA increased extracellular polymeric substances, reduced microbial diversity and shifted microbial communities. Notably, the acrA-03, mexF, fabI, intI1, intI3 and IS613 genes were enriched by MPs and TCS co-loading. Therefore, the removal of MPs and TCS from wastewater should be prioritized.
               
Click one of the above tabs to view related content.