Abstract In this work, the Ti-6Al-4V alloy and ZrB2-SiC ultra-high temperature ceramic joint was brazed by TiCuZrNi amorphous filler at 910 °C with varied holding time. The element diffusion, microstructure and… Click to show full abstract
Abstract In this work, the Ti-6Al-4V alloy and ZrB2-SiC ultra-high temperature ceramic joint was brazed by TiCuZrNi amorphous filler at 910 °C with varied holding time. The element diffusion, microstructure and precipitation phase of the joints were analyzed in details. Reaction products in the joints were identified as β-Ti, (Ti,Zr)2(Cu,Ni), TiCu, Ti2Cu, TiC, Ti5Si3, TiB and TiB2. The formation schemes of reaction products were investigated. The holding time has substantial impacts on interfacial microstructure and shear strength of joints. A maximum shear strength of 345 MPa of the joint was reached under a brazing temperature of 910 °C and holding time of 1200 s. It is also found that the shear strength depends on the amount of eutectic structure and brittle compounds in the joints.
Journal Title: Journal of Manufacturing Processes
Year Published: 2017
Link to full text (if available)
Share on Social Media: Sign Up to like & get
recommendations!