LAUSR

Abstract Experimental investigations were carried out to study the influence of weld joint design and post weld thermal aging treatments on the metallurgical, intergranular and pitting corrosion behavior of AISI 304L stainless steel welded joints. 10 mm thick linear weld joints were fabricated using gas metal arc welding process using single-V and double-V joint design with an average heat input of 503.42 J/mm and 562.78 J/mm respectively. Thermal aging of these welds was carried out at 750 °C for 0.5 h and 4 h, and the cooling media used was furnace, air and water quench (used separately for each specimen), so as to induce variable degree of carbide precipitation in different zones of these welds. Microstructural studies revealed that the extent of carbide precipitation was more in case of welds made using double-V joint design as compared to single-V joint welds. Degree of sensitization (DOS) and pitting performance of these welds evaluated using double loop electrochemical potentiokinetic reactivation (DLEPR) technique and potentiodynamic anodic polarization technique respectively, further showed that single-V joint performed better in terms of corrosion properties owing to lesser precipitation as compared to the double-V joint. This study shows that in comparison to double-V joint, single-V joint design can prove to be an important part of fabrication procedures where service conditions demand better corrosion properties of these welds.