LAUSR

Abstract In this study, the carbon fiber reinforced ZrB2-SiC composite ceramic was joined to Ti6Al4V alloy with Ag-Cu eutectic alloy filler at varied holding time and a fixed temperature of 800℃. Interface microstructure and shear strength of brazing joints were studied. The brazed ZSCf ceramics/AgCu/TC4 alloy is endowed with good metallurgical bondings. A typical interfacial structure of joints brazed for 10 min was found as ZSCf/TiC/Ti5Si3/Ag(s,s)/Cu(s,s) + TiC/TiCu/Ti2Cu/(TiC + TiCu)/TC4 alloy. Increase of holding time did not vary the precipitated phase of the joints but decreased thickness of the Ag(s, s) and Cu(s, s) reaction layer and gradually thickened the Ti-Cu reaction layer near the TC4 side. The formation process of reaction products was discussed in detail. The holding time substantially influenced shear strength of the joints. A maximum shear strength of 39 MPa was reached at a brazing time of 20 min.