Abstract Ba0.5Sr0.5Fe12O19(hard)-CoFe2O4(soft) nanocomposite ferrites synthesized using the citrate-gel combustion method was subjected to different annealing temperatures (Ta) (700 °C, 800 °C, 900 °C, and 1000 °C), and the resultant structural and magnetic properties were… Click to show full abstract
Abstract Ba0.5Sr0.5Fe12O19(hard)-CoFe2O4(soft) nanocomposite ferrites synthesized using the citrate-gel combustion method was subjected to different annealing temperatures (Ta) (700 °C, 800 °C, 900 °C, and 1000 °C), and the resultant structural and magnetic properties were investigated. The microstructural characterization of nanocomposites via X-ray diffraction (XRD), Raman, and transmission electron microscopy (TEM) analysis at first revealed the dominance of soft phases annealed at 700 °C and then showed the presence of hard phases at 900 °C. Lattice vibrational analysis again showed a clear distinction between the bands corresponding to Ta at 700 °C and 900 °C. An increase in saturation magnetization (MS) and coercivity (HC) was observed upon increasing the Ta. A good combination of MS (56.9 emu/g) and HC (3.3 kOe) was obtained at Ta = 900 °C. In addition, high-temperature magnetic studies confirmed the dominance of soft phase with Curie temperatures of 592 °C and 480 °C for the samples annealed at 700 °C and 900 °C, respectively. Combining these facts, a detailed mechanism involving the domination of spinel plates and hexagonal layers was drawn. The magneto crystalline anisotropy was evaluated and showed a maximum for Ta at 900 °C. The extent of exchange coupling between the hard and soft phases was further analyzed by switching field distribution curves and is discussed in detail.
               
Click one of the above tabs to view related content.