Abstract Shale oil reservoirs characterized by complex pore structures typically contain a wide pore size range from nanometers to millimeters. The pore size distribution (PSD) is one of the most… Click to show full abstract
Abstract Shale oil reservoirs characterized by complex pore structures typically contain a wide pore size range from nanometers to millimeters. The pore size distribution (PSD) is one of the most critical parameters affecting fluid storage and transport properties in shale oil reservoirs. Quantitatively and accurately determining PSD is of great importance for evaluating the shale oil occurrence state and movable fluid volume. In this study, four major techniques, including nitrogen adsorption (NA), scanning electron microscopy (SEM), mercury injection capillary pressure (MICP) and nuclear magnetic resonance (NMR), were adopted to determine pore sizes in ten shale oil reservoir samples from Dongying sag, Bohai Bay basin, China. NMR T2 spectra were converted to PSDs by using a new subsection calibration method based on the NA and SEM measurements; using the linear and power exponent conversion models, these two models are compared. The results show that the subsection calibration is an effective method for shale NMR T2 spectrum conversion. Shale oil reservoir T2 spectra can be converted to full-scale PSDs by combining NA micropore ( 1000 nm) in shale oil reservoirs; however, they are mainly connected by small-scale throats. Therefore, the comprehensive characterization of shale oil reservoir pore structures may be efficiently and accurately determined by a combination of NMR and MICP.
               
Click one of the above tabs to view related content.