LAUSR

Abstract Novel mixed matrix membranes of polyvinyl chloride-co-vinyl acetate/cellulose acetate (PVCA/CA) infused with nanoparticles of both pristine zeolite (p-zeolite) and 3-aminopropyl triethoxysilane (APTS) functionalized zeolite (f-zeolite) were synthesized by dissolution casting method for desalination application. MMMs were characterized using FTIR, SEM, contact angle and DMA analysis. FTIR and TGA analysis were also carried out for zeolite particles to confirm the surface functionalization. The loading effect of zeolite (1, 3 and 5 wt %) and the impact of APTS functionalization on dispersion, morphological structure, thermo-mechanical properties and hydrophilicity were also analyzed. Desalination performance of the membranes was evaluated using 2000 ppm NaCl solution at 6 bar pressure. SEM analysis demonstrated that APTS functionalization improved the uniformity of the zeolite nanoparticle in the membrane and a noticeable reduction in undesirable microscopic voids. Higher hydrophilicity was attained with the inclusion of f-zeolite nanoparticles, as confirmed by contact angle analysis. It was found that the membrane infused with 5 wt % of f-zeolite exhibited substantial improvements in storage modulus, glass transition temperature and crosslink density. Membranes infused with f-zeolite demonstrated enhanced transport mechanism without showing tradeoff between water flux and salt rejection. In particular, inclusion of 5 wt % f-zeolite, resulted the highest salt rejection of 99.56% with water flux increment of ∼24% in comparison to the neat PVCA/CA membrane. Finally, the membranes were tested for anti-fouling properties using flux recovery ratio test. Thus, the newly developed PVCA/CA matrix system embedded with APTS functionalized zeolite can be exploited for high performance desalination applications.