LAUSR

Abstract Inverted annular film boiling (IAFB) is one of the post critical heat flux (post-CHF) regimes, which may occur during the core reflooding phase following large-break loss of coolant accidents in water-cooled nuclear reactors. This paper first analyzes wall heat transfer characteristics and summarizes convective wall heat transfer coefficient correlations developed for the IAFB regime in the literature. Parametric effects of the inlet subcooling, mass flux, and pressure on the wall Nusselt number in the IAFB regime are studied. It is found based on the experimental data in the literature that the system pressure has negligible effect on the wall Nusselt number while the effects of the mass flux and inlet subcooling are complex and depend on the flow conditions. The modified Bromley model and laminar flow model with an enhancement factor for the IAFB regime, currently used in COBRA-TF and TRACE, respectively, are compared with Stewart’s experimental data under subcooled and low-quality conditions in the IAFB regime. Both of these two models under-predict the heat transfer coefficients calculated from Stewart’s experimental data for high flow and high subcooling conditions. Based on the analysis of the parametric effects, two new wall heat transfer correlations are proposed by correlating the Nusselt number and non-dimensional vapor film thickness using Stewart’s experimental data and benchmarked against the experimental data in the literature. These two new correlations cover ranges of the system pressure from 2.0 to 9.0 MPa, mass flux from 215 to 923 kg/m2-s, and inlet subcooling up to 50 °C.