LAUSR

The concentration of skim milk and whey was investigated at a pilot scale using forward osmosis membranes with an installed membrane area of 24 m2. The pilot plant was operated in batch mode using a draw solution (48–57 g/L of NaCl) that mimics the potential brine streams available in a dairy processing plant. This approach avoids or limits the need for the regeneration of a synthetic draw solution. A concentration factor of ∼2.5 was achieved for both the skim milk and fresh whey, resulting in a total solids concentration of ∼21 wt% and 15 wt%, respectively. Increasing the transmembrane pressure was found to be effective in improving the water flux, whereas a much greater increase in the draw solution osmotic pressure would be needed to achieve the same enhancement of flux. This study also showed that small organic molecules, such as lactose, were not fully rejected by the forward osmosis membranes. A cleaning protocol was established for recovering the membrane performance after milk and whey concentration. The specific energy required for milk and whey concentration using only the forward osmosis step (5–10 kWh/t water removed) is much lower than that required by reverse osmosis. Forward osmosis is an energy efficient and effective process for dairy applications if unlimited access to a brine stream can be made available within or in the proximity of dairy processing plants.