LAUSR

Abstract Red oak biocharcoal, a novel electrode material that is inexpensive and highly conductive, was used for capacitive deionization (CDI) to simultaneously remove Cl− and Cr3+ from leather processing wastewater. The results showed that both the carbonization temperature and time played important roles in reducing the resistivity (ρ) of biocharcoal. Additionally, at 1000 °C and 3 h, the ρ value was reduced from 4.68 to 1.19 Ω·cm after the addition of Fe2O3. KOH impregnation enhanced the desalination capacity of the biocharcoal electrodes by increasing the specific surface area and hydrophilicity. Under the optimal operating parameters (voltage of 1.8 V, flow rate of 10 ml/min and electrode spacing of 2 mm), the KOBC15 electrode exhibited a maximum adsorption capacity of 13.79 mg/g. After 10 cycles of CDI system operation, the removal rates of Cl− and Cr3+ reached 86.7% and 100%, respectively, in simulated leather processing wastewater. This work provides new ideas and methods for the treatment of high-salinity wastewater.