LAUSR

Abstract An extraction-electrooxidation (E-EODS) system is introduced for the removal of dibenzothiophene (DBT) from model fuel (DBT in n-hexane). The process is run in an electrochemical cell as a batch reactor, where, the model fuel is in contact with an appropriate immiscible polar solvent composed of acetonitrile and water (MeCN-water, 90:10% v/v) that serves as both the extraction solvent and electrochemical medium. The electrochemical oxidation of DBT, which is extracted into the MeCN-water phase, enhances the continuous removal of DBT from the model fuel phase. The effects of the composition of the extraction solvent, applied potential and the process time on DBT removal efficiency are assessed. The results indicate that with the selection of the MeCN-water, 90:10 v/v in a 1:1 ratio respect to the model fuel, this extraction method yields about 100 % extraction efficiency within 5 h, at 25 oC at 2.9 V and atmospheric pressure as determined by HPLC technique. Cyclic voltammetry (CV), Fourier transform infrared (FT-IR) spectroscopy, and gas chromatography-mass spectrometry (GC-MS) techniques are applied to identify the electrochemical oxidation products of DBT. The electrochemical oxidation-derived extraction process through this method is innovative and feasible for deep desulfurization of liquid fossil fuels.