LAUSR

Abstract In this work, a three-step (sulfurization-selenization-sulfurization) annealing process was designed to optimize the surface constitution of Cu2ZnSn(S, Se)4 (CZTSSe) thin films, which was prepared by oxide nanoparticles-based approach. The devices with the Mo/CZTSSe/CdS/ZnMgO/ZnO:Al/Al structure were fabricated and their performances were studied. The additional post-sulfurization with low toxicity sulfur powder has negligible impact on the structure, morphology and composition of CZTSSe bulk, however, it improves open circuit voltage of device significantly. The open circuit voltage can be increased significantly from 408 mV (without surface sulfurization) to 497 mV (with surface sulfurization). This is benefited from the increase of surficial sulfur content and the broadening of the surface band-gap of the CZTSSe thin film. The result is confirmed by X-ray photoelectron spectroscopy analysis. Such a crucial three-step annealing process promotes the power conversion efficiency from 4.71% (2-step) to 6.37% (3-step), which is the champion efficiency of oxide precursor derived CZTSSe solar cell.