The tunability of the Zn(O,S) conduction band edge makes it an ideal, earth-abundant heterojunction partner for Cu_(2)O, whose low electron affinity has limited photovoltaic performance with most other heterojunction candidates.… Click to show full abstract
The tunability of the Zn(O,S) conduction band edge makes it an ideal, earth-abundant heterojunction partner for Cu_(2)O, whose low electron affinity has limited photovoltaic performance with most other heterojunction candidates. However, to date Cu_(2)O/Zn(O,S) solar cells have exhibited photocurrents well below the entitled short-circuit current in the detailed balance limit. In this work, we examine the sources of photocurrent loss in Cu_(2)O/Zn(O,S) solar cells fabricated by sputter deposition of Zn(O,S) on polycrystalline Cu_(2)O substrates grown by thermal oxidation of Cu foils. X-ray photoelectron spectra reveal that Zn(O,S) deposited at room temperature leads to a thin layer of ZnSO_4 at the Zn(O,S)/Cu_(2)O interface that impedes current collection and limits the short circuit current density to 2 mA/cm^2. Deposition of Zn(O,S) at elevated temperatures decreases the presence of interfacial ZnSO_4 and therefore the barrier to photocurrent collection. Optimal photovoltaic performance is achieved at a Zn(O,S) deposition temperature of 100°C, which enables an increase in the short circuit current density to 5 mA/cm^2, although a small ZnSO_4 layer is still present. Deposition at temperatures above 100°C leads to a reduction in photovoltaic performance. Spectral response measurements indicate the presence of a barrier to photocurrent and exhibit a strong dependence on voltage and light bias, likely due to the photodoping of Zn(O,S) layer.
               
Click one of the above tabs to view related content.