This study revealed that, Thiothrix eikelboomii, a well-known filamentous bacterium that causes sludge bulking, could also interfere oxygen transfer during wastewater treatment. The volumetric oxygen transfer coefficient (KLa) in filamentous-bulking… Click to show full abstract
This study revealed that, Thiothrix eikelboomii, a well-known filamentous bacterium that causes sludge bulking, could also interfere oxygen transfer during wastewater treatment. The volumetric oxygen transfer coefficient (KLa) in filamentous-bulking sludge (FBS) was found to be 43% lower than that in floc-forming sludge (FFS) at similar biomass concentrations, partially because the filamentous bacteria had increased the sludge apparent viscosity. The KLa value for FBS, however, was still significantly lower than that for FFS even if both sludges had similar apparent viscosity. Numerous tiny and free-swimming filaments were observed to attach on the air bubble surface, presumably reducing the liquid film renewal and increasing the liquid film thickness. Moreover, the filaments were co-coated with extracellular polymeric substances of protein and polysaccharide, which could make them performing like "amphiphilic molecules" of surfactants to hinder oxygen transfer. Therefore, the particular surface property of filaments and their interaction with air bubbles could also impact oxygen transfer. Thiothrix eikelboomii was identified to be the responsible filamentous bacterium that lowered the KLa value, while other filamentous bacteria with short filaments did not interfere oxygen transfer. This study implies that controlling sludge bulking benefits not only sludge settling but also oxygen transfer.
               
Click one of the above tabs to view related content.