LAUSR

While flow-electrode capacitive deionization (FCDI), one of the most popular CDI variants, possesses a number of advantages over conventional fixed-electrode CDI (e.g., large salt adsorption capacity, high flow efficiency and convenient management of the electrodes), challenges remain in constructing and operating an FCDI system such that it can operate continuously. Here we achieve effective continuous removal of salt from a brackish feed stream using flowing carbon electrodes which are regenerated in a closed-loop manner by using our previously introduced integrated FCDI/MF strategy. The performance of the FCDI/MF system is characterized over a two week period of operation with key factors influencing the desalination performance identified. Results show that the FCDI/MF system is capable of continuously desalinating brackish water (∼2 g L-1) to portable levels (<0.5 g L-1) whilst sustaining an extraordinary water recovery rate (∼92%) and relatively low energy consumption (∼0.5 kWh m-3). No obvious deterioration in performance or membrane fouling was observed during the 14-day operation. While the carbon particles used in the flow electrode exhibited only a minor increase in oxygen-containing groups over the 14 days of operation, a significant reduction in particle size was observed, likely as a consequence of the high-frequency collisions and associated friction between particles that occurred in the FCDI/MF system. Further studies regarding flowable electrode optimization, cell configuration design and process modelling are needed in order to realize the scale-up and practical implementation of this emerging technology.