LAUSR

Specific and sensitive sensing of most pesticide residues relies on enzymes such as acetylcholinesterase and advanced materials, which need to be loaded on the surface of working electrodes, leading to instability, uneven surface, tedious process, and high cost. Meanwhile, employing certain potential or current in electrolyte solution could also modify the surface in situ and overcome these drawbacks. However, this method is only regarded as electrochemical activation widely applied in the pretreatment of electrodes. In this paper, by means of regulating the electrochemical technique and its parameters, we prepared a proper sensing interface and derivatized the carbaryl (a carbamate pesticide) hydrolyzed form (1-naphthol) to enhance sensing by 100 times within several minutes. After regulation I by chronopotentiometry with 0.2 mA for 20 s or chronoamperometry with 2 V for 10 s, abundant oxygen-containing groups form and the ordered carbon structure is destroyed. Sweeping from -0.5 to 0.9 V through cyclic voltammetry for only one segment, following regulation II, the composition of oxygen-containing groups changes and the disordered structure is alleviated. Finally, on the constructed sensing interface, test by regulation III through differential pulse voltammetry from 0.8 to -0.4 V, resulting in derivatization of 1-naphthol during 0.8-0 V, followed by electroreduction of the derivative at around -0.17 V. Compared with the electro-oxidation peak at 0.5 V in previous reports, it is essential to improve specificity, even toward several other carbamate pesticides with similar structures. Hence, the in situ electrochemical regulation strategy has demonstrated great potential for effective sensing of electroactive molecules.