LAUSR.org creates dashboard-style pages of related content for over 1.5 million academic articles. Sign Up to like articles & get recommendations!

Laboratory Study of CO2 Foam Flooding in High Temperature, High Salinity Carbonate Reservoirs Using Co-injection Technique

Photo by eiskonen from unsplash

In this research, an ethoxylated amine surfactant is co-injected with CO2 in a series of coreflooding experiments at typical Middle Eastern reservoir conditions of high temperature, high salinity, and in… Click to show full abstract

In this research, an ethoxylated amine surfactant is co-injected with CO2 in a series of coreflooding experiments at typical Middle Eastern reservoir conditions of high temperature, high salinity, and in situ foam is generated to reduce gas mobility in the absence of oil. The effects of reservoir permeability, injection rates, and foam quality on mobility reduction factor (MRF) and apparent viscosity of foam are discussed. In the absence of oil, an optimum foam quality of 80% is obtained using 1 wt % of surfactant solution. Shear thinning foams with viscosities ranging between 0.9 and 2.4 cP were formed at all velocities tested in this study. MRFs of 50 and 70 were obtained, respectively, in 70 and 240 mD cores at 80% foam quality, confirming that foam strength increases with increasing rock permeability. After determination of optimum foam quality and flow rate, a final coreflooding experiment was conducted in the presence of oil to quantify the effect of oil presence on foam generation and to observe th...

Keywords: foam; high temperature; temperature high; foam quality; high salinity

Journal Title: Energy & Fuels
Year Published: 2017

Link to full text (if available)


Share on Social Media:                               Sign Up to like & get
recommendations!

Related content

More Information              News              Social Media              Video              Recommended



                Click one of the above tabs to view related content.