LAUSR

Self-powered, biocompatible pumps in the nanometer to micron length scale have the potential to enable technology in several fields, including chemical analysis and medical diagnostics. Chemically powered, catalytic micropumps have been developed but are not able to function well in biocompatible environments due to their intolerance of salt solutions and the use of toxic fuels. In contrast, enzymatically powered catalytic pumps offer good biocompatibility, selectivity, and scalability, but their performance at length scales below a few millimeters, which is important to many of their possible applications, has not been well tested. Here, urease-based enzyme pumps of millimeter and micrometer dimensions were fabricated and studied. The scaling of the pumping velocity was measured experimentally and simulated by numerical modeling. Pumping speeds were analyzed accurately by eliminating Brownian noise from the data using enzyme patches between 5 mm and 350 μm in size. Pumping speeds of microns per second could be achieved with urease pumps and were fastest when the channel height exceeded the width of the catalytic pump patch. In all cases, pumping was weak when the dimensions of the patch were 100 μm or less. Experimental and simulation results were consistent with a density-driven pumping mechanism at all sizes studied and served as a framework for the in silico study of more complex two-dimensional (2D) and three-dimensional (3D) geometries. Attempts to create directional flow by juxtaposing inward and outward pumps were unsuccessful because of the symmetry of convection rolls produced by millimeter-size pump patches and the slow speeds of smaller pumps. However, simulations of a corrugated ratchet structure showed that directional pumping could be achieved with pump patches in the millimeter size range.