LAUSR

Ti3C2Tx MXene, a two-dimensional transition metal carbide, has attracted substantial interest due to its unique physical properties and a wide range of potential applications. Although the properties of devices using MXene have been substantially enhanced in recent years, it is not fully understood how the oxygen concentration in Ti3AlC2 MAX affects oxide formation in Ti3C2-based MXene nanosheets and their fundamental properties. To this end, we compared two types of MAX phases: MAX with low oxygen content (LO-MAX) and MAX synthesized by a conventional process. Since the conventional MAX synthesis employs metal (Ti) as a primary material, it is referred to as metal-based MAX (MB-MAX) from here. The oxygen content of the LO-MAX was only 0.56 wt %, which was about 20% compared to that of MAX synthesized using conventional methods. We compared the properties of MXene nanosheets prepared from the LO-MAX with MXene nanosheets obtained from the MB-MAX. Microscopic and chemical analyses revealed smooth and wrinkle-free morphology and small amounts of oxygen in MXene nanosheets prepared from LO-MAX (LO-MXene). The LO-MXene nanosheet film exhibited an exceptionally high conductivity of 10,540 S/cm and an ultralow surface roughness of 1.7 nm, which originated from inhibited surface oxide formation. Moreover, the inhibition of oxide formation strengthened the function of -O or -OH groups on the surface of MXene, thereby facilitating strong hydrogen bonding to the polymer with hydroxyl groups. To clearly reveal these properties, we prepared a pressure sensor by coating these MXene nanosheets on nylon/polyester fibers. The fabricated sensor exhibited a high sensitivity of up to 85.6/kPa and excellent stretch stability and reliability. These results clearly revealed that lowering the oxygen content in MAX can make a decisive contribution to improving the fundamental properties of MXene nanosheets prepared therefrom.