LAUSR

Natural gas is sampled and produced throughout the lifespan of a petroleum field. Gas composition and isotope data are critical inputs in the exploration and field development, such as gas show identification, petroleum system analysis, fluid characterization, and production monitoring. On-site gas analysis is usually conducted within a mud gas unit, which is operationally unavailable after drilling. Gas samples need to be taken from the field and shipped back to the laboratory for gas chromatography and isotope-ratio mass spectrometry analyses. Results are usually without sufficient resolution to fully characterize the heterogeneity and dynamics of fluids within the reservoir and the production system. In addition, it often takes a considerable time to obtain the results using the traditional method. A novel QEPAS (quartz-enhanced photoacoustic spectroscopy) sensor system was developed to move gas composition analyses to field for quasi-real-time characterization and monitoring. With respect to previously reported QEPAS prototypes for trace gas detection, the new system realized measuring concentrations of methane (C1), ethane (C2), and propane (C3) in gas phase within the percentage range that is typically encountered in natural gas samples from oil and gas fields. A gas mixing enclosure was used to dilute the natural gas-like mixtures in nitrogen gas (N2) to avoid the saturation of QEPAS signals. An iterative analysis based on multilinear regression of QEPAS spectra was developed to filter out the influence of gas matrix variation from multiple hydrocarbon components. The advance in simultaneous measuring hydrocarbon gases and expanded linearity range of QEPAS, with previously reported detection of H2S, CO2, and gas isotopes (12CO2/13CO2, 13CH4/12CH4), opens a way to use the advanced sensing technology for in situ and real-time gas detection and chemical analysis in the oil industry.