LAUSR

We report an innovative approach to creating stretchable conductive materials composed of a tubular shell made from braided carbon nanotube yarns (CNTYs) embedded in an elastomeric matrix. For stretchable electronics, both mechanical properties and electrical conductivities are of interest. Consequently, both the mechanical behavior and electrical conductivities under large deformations were investigated. A new hyperelastic composite model was developed to predict the large deformation response to applied stress for a braid in a tubular elastomer composite. The composite demonstrated a hyperelastic response due to the architecture of the braid, and the behavior was affected by the braiding angle, braid modulus, and volume fraction of fibers. The elastomer matrix was considered a neo-Hookean material and represented by the Yeoh model. An interaction parameter was proposed to account for the effect of the elastomer/braid cooperative restriction as observed in experimental and calculated results. This novel approach enabled the determination of the constitutive behavior of the composite in large deformations (>150%), taking into account the elastomer and yarn properties and braid configurations. The model exhibited good agreement with the experimental results. As the CNTYs are conductive, a stretchable conductive composite was obtained having a resistivity of 5.01 × 10–4 and 5.67 × 10–5 Ω·cm for the 1-ply and 4-ply composites, respectively. The resistivity remained constant through cyclic loading under large deformations in tension until mechanical failure. The material has potential for use in stretchable electronics applications.