LAUSR

The effect of zinc borate (ZB) and high-molecular-weight siloxane (SIL) on flame retardancy, mechanical, and thermal properties of aliphatic polyketone (POK)-containing aluminum diethyl phosphinate (OF) was investigated in this study. Ten wt % OF is sufficient to obtain V0 rating according to the UL94 test. As the weight fraction of OF was increased, the flame retardancy properties and LOI values improved, while the tensile and impact properties decreased. To avoid the degradation in mechanical and impact properties as much as possible and obtain the same and better flame retardancy properties, synergists such as SIL and ZB were used. Flame retardancy of POK-based composites was determined by the limiting oxygen index (LOI) test, UL94 measurement, and cone calorimeter test. The additions of 1 wt % SIL and ZB have not led to a considerable decrease in the tensile strength and impact properties of POK-10OF. While ZB and SIL are very efficient in decreasing the smoke density, ZB is more efficient than SIL in increasing the LOI value of the composite. The addition of 1, 2, and 4 wt % ZB and SIL synergists did not lower their UL94 ratings. Moreover, it can be added that ZB is more efficient than SIL in decreasing the fire growth rate (FIGRA) and maximum average rate of heat emission (MARHE) values. Using OF (10 wt %) and ZB (4 wt %), LOI values higher than 32% and smoke density values lower than 150 were obtained.