LAUSR

Al–Mg alloys undergo sensitization when exposed to elevated temperatures, making them susceptible to intergranular corrosion and stress corrosion cracking. Most of the existing research on microstructure effects on sensitization is centered on the effect of intrinsic grain boundary characteristics such as misorientation angle and coincident site lattice (CSL) values. Very few studies have systematically investigated the influence of extrinsic characteristics such as dislocation density. In this paper, the influence of local microstructure characteristics on the sensitization susceptibility of AA5456 was investigated using in situ optical microscopy corrosion experiments and electron back scattering diffraction analysis. The results show a clear trend between the local geometrically necessary dislocation (GND) density and β phase precipitation, with higher GND densities correlating with higher rates sensitized boundaries. This trend held true even for low angle grain boundaries. These results demonstrate the importance of considering factors beyond grain boundary characteristics in determining susceptibility to sensitization.