LAUSR

The unique combination of piezoelectric energy harvesters and light detectors progressively strengthens their application in the development of modern electronics. Here, for the first time, we fabricated a polyvinylidene fluoride (PVDF) and formamidinium lead bromide nanoparticle (FAPbBr3 NP)-based composite aerogel film (FAPbBr3/PVDF) for harvesting electrical energy and photodetector applications. The uniform distribution of FAPbBr3 NPs in FAPbBr3/PVDF was achieved via the in situ synthesis of FAPbBr3 NPs in the PVDF matrix, which led to the stabilization of the γ-phase. The freeze-drying process induced an interconnected porous architecture in the composite film, making it more sensitive to small mechanical stimuli. Owing to this unique fabrication technique, the constructed aerogel film-based nanogenerator (FPNG) exhibited an output voltage and current of ∼26.2 V and ∼2.1 μA, respectively, which were 5-fold higher than that of the nanogenerator with the pure PVDF film. Also, the sensitivity of FPNG upon the irradiation of light was demonstrated by the output voltage reduction of ∼38%, indicating its capability as a light sensing device. Furthermore, the prepared FAPbBr3/PVDF composite was found to be an efficient candidate for light detection applications. A simple planar photodetector was fabricated with the 8.0 wt% FAPbBr3 NP-loaded PVDF composite, which displayed very high responsivity (8 A/W) and response speed of 2.6 s. Thus, this exclusive combination of synthesis and fabrication for the preparation of electro-active films opens a new horizon in the piezoelectric community for effective energy harvesting and light detector applications.