LAUSR

Highly dispersed LaCo1-x-yCuxTiyO3/KIT-6 perovskites were synthesized by the citrate method with inert mesoporous KIT-6 addition. The KIT-6 matrix was removed by dissolution in 7% NaOH aqueous solution. The dispersity of perovskites probably varies depending on the largest cation and its content at the B position of the perovskite ABO3 structure. The CoS=23+/CoS=03+ ratio increases with the increase in copper content and in the presence of Ti4+. It may be explained by the compensation of the distortion of the perovskite structure. The maximum syngas conversion is achieved at nCo/nCu = 7/3. At a higher copper content, the activity of the samples decreases due to the formation of large copper particles (up to 40 nm) in the course of the reduction. The selectivity for alcohols increases with an increase in the proportion of copper and reaches maximum values at a ratio of nCo/nCu close to 1. The distribution of alcohols is the same for all samples, except for LaCo0.35Cu0.35Ti0.3O3/KIT-6. It can be assumed that the synthesis of alcohols proceeds on bimetallic CoCu particles 3 nm in size and cobalt particles 4-6 nm in size, most likely enriched with copper on the surface.