LAUSR

Endoscopic pancreatic stenting for symptomatic strictures is beneficial to patients with chronic pancreatitis [1]. However, stent-related problems occur, including migration and immobility, which are more serious for pancreatic stents than for biliary stents because the pancreatic duct bends and is narrow [2]. We encountered a rare case with a pancreatic stent that could not be removed using forceps and was successfully retrieved using a novel thin-tipped balloon catheter. A 77-year-old man with chronic pancreatitis was admitted for abdominal pain caused by a severe main pancreatic duct stricture. A 7-Fr plastic stent (Boston Scientific Corporation, Marlborough, Massachusetts, USA) was placed and his symptoms improved (▶Fig. 1). Endoscopic retrograde cholangiopancreatography (ERCP) was performed 3 months later to retrieve or exchange the stent. However, when we attempted to remove the stent with forceps, resistance was encountered, the stent did not move and part of it tore off (▶Fig. 2). This was probably associated with the severity and length of the stricture, and stent degradation. After the lumen of the stent had been cannulated with a 0.025-inch guidewire, a novel balloon catheter with a thinner tip (REN Biliary Balloon Dilation Catheter; 4-mm wide, 30-mm long; Kaneka Corporation, Osaka, Japan) was inserted, inflated inside the stent, and we attempted to pull the stent down (▶Fig. 3). The stent was successfully retrieved without any adverse events (▶Video1). Although rare, an immovable pancreatic stent can be a major complication. Removal using forceps can tear off a plastic stent that is immobile and perishing. The novel balloon catheter used to retrieve the stent from this patient has a tapered and thinner 3-Fr tip that is of adequate rigidity (▶Fig. 4) [3]. Hence, when forceps cannot remove a pancreatic stent, balloon retrieval should be attempted, and the aforementioned thin-tipped balloon catheter may be more suitable for this procedure than other conventional balloon catheters.