LAUSR

The gas spark switch is the most used key device in pulsed power systems. As a difficult problem affecting the performance of the gas spark switch, electrode erosion has always been of wide concern and has been studied by scholars. In order to reduce electrode erosion, the erosion resistance of the electrode materials is particularly critical. At present, researchers at home and abroad mainly perform a large number of experiments to compare the erosion resistance of different electrode materials, which require a lot of time and are expensive. Based on the theoretical derivation of the erosion heat conduction process and the analysis of the molten pool movement process, a theoretical prediction model of erosion resistance of electrode materials is established in this paper. The prediction results of this model are consistent with the experimental results of most researchers in the past. In order to further verify the accuracy of this model, this paper selected six electrode materials [stainless steel, brass, RHEAs (Refractory High Entropy Alloys), 90WCu alloy, 70WCu alloy, and 50WCu alloy] tested for 10 000 times under the experimental conditions of a peak current of 30 kA, a single discharge charge transfer of 78 mC, and 2 bars dry air. The final experimental results show that the six electrode materials ranked from weak to strong in erosion resistance: brass, stainless steel, 50WCu, 70WCu, RHEAs, and 90WCu, which is consistent with the prediction results of the model.