LAUSR

ABSTRACT Dressing is a sharpening operation aimed to produce a specific groove shape on the active surface of the wheel. The preparation of grinding tools in special way is the most important enabling factor in the grinding process. It greatly influences the subsequent geometry of the workpiece. As the groove shape of the wheel surface determines the shape of the surface patterns, therefore, it is essential to produce desired groove on the wheel cutting surface before grinding. Therefore, an elliptical groove surface pattern model is proposed based on grinding with dressed wheel. An elliptical tip tool is used for the dressing process to make grooves on the wheel instead of sharp tip tool or rounded tip tool in the previous work. The dressing tool passes helically over the surface of the grinding wheel for making grooves. After that, the grooved wheel passes over the flat surface to generate elliptical patterns. The results showed the three-dimensional geometry of the surface patterns with elliptical groove which are uniformly distributed on the workpiece. An experiment is carried out for the verification of the simulation results and it is revealed that the simulation results agreed well with the experiment.