LAUSR

ABSTRACT The prediction model of instantaneous uncut chip thickness is critical for micro-end milling process, which can directly affect the cutting forces, surface accuracy, and process stability of the micro-end milling process. This paper presents an instantaneous uncut chip thickness model systematically based on the actual trochoidal trajectory of tooth and the tool run-out in micro-end milling process. The variable entry and exit angles of tool, which are affected by the tool run-out, are concerned in the model. The related instantaneous uncut chip thickness is evaluated by considering the theoretical instantaneous uncut chip thickness and the minimum uncut chip thickness, which is formulated by two types of material removal mechanisms, in the elastic-plastic deformation region and the complete chip formation region, respectively. In comparison with the instantaneous chip thickness obtained from the conventional model, the feasibility of the proposed model can be proved by the related simulation results with variable process parameters including feed per tooth, radial depth of cut, and tool run-out. In addition, the predicted and measured cutting forces are compared with validate the accuracy of the proposed instantaneous uncut chip thickness model for the micro-end milling process.