LAUSR

The existing sensing technology for industrial robot hands cannot sense inside of an object. To recognise the material and internal distribution of an object when it is grasped, electrical capacitance tomography (ECT) may be used if the object is non-conductive, as ECT can measure the permittivity distribution inside an object from external capacitance measurements. An ECT sensor normally has 8 or 12 electrodes equally distributed around an object. This paper introduces the first attempt to make use of ECT with robot hands. Because the number of electrodes is limited, it is necessary to rotate the object to be imaged mechanically, so that sufficient measurements can be taken. Four aspects of the ECT sensor are discussed based on simulation: (1) the structure of electrodes; (2) the number of rotation times; (3) the starting position of rotation; and (4) the diameter of rotation. Two image reconstruction algorithms are used: the linear-back projection and Landweber iteration with three typical distributions. The results show that the rotational three-electrode ECT structure has good ability to produce useful images, showing the internal distribution of unknown objects.