LAUSR

Thin film samples where one of the thin layers consists of vacuum or air are called PillarHalls due to their support structure in silicon wafers. Custom PillarHall samples were provided by manufacturer and characterized by reflectometry with spectrometer Cary 7000. Data at 8 degrees of angle of incidence were collected with p-polarization of the incident light within the wavelength range of 550-1800 nm. Then these data were analyzed with a dedicated MATLAB code, using fitting software accompanying the transfer matrix method for calculation of the reflectance spectrum. Layer thicknesses and unknown refractive indices were chosen as fitted parameters. The oscillating reflectance spectrum of a PillarHall test chip yielded the air gap thickness of 86 nm with an estimated standard uncertainty of 5 nm. This is close to the nominal value of 100 nm. The results demonstrate that reflectometry data are sensitive to the thickness of a thin air layer deep inside the silicon structure.