LAUSR

Recently, the demand for the sensitive detection of nanomaterials and biomolecules has been increasing for evaluating the toxicity of nanomaterials and early diagnosis of diseases. Although many studies have developed new detection assays, these are heavily influenced by the capabilities of the detection equipment. Therefore, the aim of the present study was to improve electrode performance by modifying the surface of the detection electrode using a simple method. Electrode surface modification was performed using carbon nanotubes (CNT) and porous gold nanostructures (NS) with excellent electrical and chemical properties. Through the simple physical deposition of CNT and electrochemical reduction of NS, the increasement of the electrode surface area was achieved. Because of the CNTs attached to the electrodes at the first step, the metal ions constituting the NS can adhere well to the electrodes. Nanoparticles with a porous structure can be generated through electrochemical reduction (cyclic voltammetry) of metal ions attached to electrodes. Consequently, the surface area of the electrode increased and electrochemical performance was improved (confirmed by atomic force microscopy, Nyquist plot and Bode plot). To quantitatively confirm the improvement of electrode performance according to the surface change through the proposed treatment technique, DNA was detected. Unlike previous surface modification studies, the developed surface treatment technique can be applied to a variety of detection equipment. To confirm this, the detection was performed using two detection devices with different operating principles. DNA detection using the two types of equipment confirmed that the detection limit was increased by approximately 1000-fold through applying a simple surface treatment. In addition, this method is applicable to detect various sizes of nanomaterials. The method proposed in this study is simple and has the advantage that it can be applied to various devices and various materials.