LAUSR

This paper reports an enhancement of the nonlinear conductivity, thermal and mechanical properties of micro-silicon carbide/silicone elastomer (m-SiC/SE) composites by adding nano-aluminum nitride (n-AlN) for power module encapsulation applications. The electrical properties (such as nonlinear conductivity characteristics and transient permittivity obtained from polarization current, and trap distributions obtained from thermally stimulated depolarization current) and material properties (including thermo-gravimetric analysis, coefficient of thermal expansion (CTE), and thermal conductivity, tensile strength, strain at break and Young’s modulus) of the pure SE, m-SiC/SE microcomposites, m-SiC/n-AlN/SE hybrid composites are investigated. The effect of the m-SiC fillers and n-AlN fillers on physicochemical properties of the SE matrix is analyzed by FT-IR spectroscopy and crosslinking degree. The measured nonlinear conductivity and transient permittivity are used for electric field simulation under DC stationary and square voltages. It is found that the addition of n-AlN fillers in the SE hybrid composite improves the nonlinear conductivity characteristics and mitigates the electric field under DC stationary and square voltages, compared to the SE microcomposite. Furthermore, the m-SiC/n-AlN/SE hybrid composite has a higher thermal degradation temperature, thermal conductivity, tensile strength, Young’s modulus, and crosslinking degree than the SE microcomposite, whereas their CTE and strain at break are lower. It is elucidated that the m-SiC/n-AlN/SE hybrid composite with enhanced nonlinear conductivity and material properties is a promising packaging material for high-voltage power modules.