LAUSR

High-current superconducting CORC® wires, wound from RE-Ba2Cu3O7−δ (REBCO) coated conductors, are being developed for use in high-field magnets that would allow operation at magnetic fields exceeding 20 T. The combination of high engineering current densities and high magnetic fields results in large Lorentz forces acting on the CORC® wire that could cause irreversible degradation to its performance. The effect of axial tensile stress on the critical current of CORC® wires containing annealed solid copper formers has been measured in liquid nitrogen to determine the irreversible stress limit at which irreversible degradation occurs. The results show no significant change in critical current before the irreversible stress limit is reached, after which the critical current decreases irreversibly with applied stress. The irreversible stress limit as high as 177 MPa depends on the yield strength of the former, the number of superconducting tapes wound into the CORC® wire and the angle at which the tapes are wound. Although the irreversible stress limit of CORC® wires is lower than a rudimentary rule of mixtures estimation would suggest, the irreversible strain limit, as high as 0.85%, exceeds that of single REBCO tapes. Both effects are likely the result of the helical fashion in which the REBCO tapes are wound into CORC® wires. The performance of CORC® wires was also measured as a function of axial tensile stress fatigue cycling in liquid nitrogen. No significant performance degradation was measured up to 100 000 cycles as long as the peak stress remained below the irreversible stress limit. Only once the peak stress was increased significantly above the irreversible stress limit would the critical current suddenly decrease with stress cycles. The results indicate that CORC® wires have matured into extremely robust high-current magnet conductors capable of withstanding high levels of axial tensile stress and strain. The irreversible stress limit of CORC® wires could be increased further by using stronger formers and winding the REBCO tapes at comparable angles, while the irreversible strain limit could potentially be increased by tailoring the winding angle of the REBCO tapes, making CORC® wires one of the strongest and most elastic high-current superconducting magnet conductors available.