LAUSR

For metal parts, selective laser melting (SLM) technology has obvious advantages over traditional forming methods. Parts manufactured by selective laser melting are abbreviated as SLMed Parts. However, the surfaces of SLMed parts have many defects such as adhered particles and pores. These defects lead to poor surface quality of the parts, thus restricting the promotion of SLM technology. Therefore, the paper uses jet electrochemical machining (JECM) to remove the surface defects of SLMed sample. Optimization is technique used in manufacturing sectors to generate the best manufacturing conditions. There are many process variables involved in the JECM process, and it is difficult to select an appropriate parameters combination to maximize the removal of surface defects while minimizing material removal thickness and surface roughness. The purpose of this work is to study the influence of process parameters such as electrolyte temperature, processing time, and current density on material removal thickness, surface roughness and material removal rate in the JECM process. In Minitab19, the L25 made by Taguchi orthogonal array was used in the experiment. Each experiment is carried out under different input parameters, and the data were analyzed through analysis of variance (ANOVA). The optimized processing parameters associated with performance parameters are given and ultimately the experimental results were verified.