LAUSR

Yttrium aluminium garnet (YAG, Y3Al5O12) transparent ceramics were fabricated by vacuum sintering the co-precipitated raw powders with calcium oxide (CaO) as the sintering aid. The influence of CaO content on the phase composition, particle size and the morphologies of resultant YAG powders, as well as the microstructural and optical properties of YAG ceramics, was investigated in detail. Our results show that with increasing of CaO additives, the particle size and agglomeration degree of the powders were slightly increased and the grain growth of the ceramics was inhibited. Specifically, the grain size initially decreased dramatically till reaching a minimum value of 1.85 μm with 0.3 at% CaO, then slightly increased. In addition, for YAG ceramics with a high CaO doping level, the existence of liquid phase was observed for the first time and its sintering mechanism was discussed. The excess of CaO causes the formation of grain boundary phases and residual pores, which are detrimental for maintaining higher optical quality of YAG ceramics. We obtained a fully dense and pore-free YAG ceramic with an in-line transmittance of 80.8% at 1100 nm by adopting 0.1 at% level of CaO during sintering of the green bodies at 1780 °C for 20 h in vacuum.