LAUSR

In this study, an Inconel 625 component was fabricated by gas tungsten arc welding-based additive manufacturing and the as-deposited specimens were heat treated at 980 and 1100 °C for 1.0 h, respectively. The effects of heat treatment on the corrosion resistance and microstructure were investigated. Potentiodynamic polarization tests showed that the as-deposited Inconel 625 alloy had disparities in corrosion resistance compared with wrought Inconel 625 alloy. The corrosion resistance deteriorated after heat treatment at 980 °C due to needle-like δ phases provided more sites to pitting initiation. While the corrosion potential (Ecorr) increased by 32%, passivation current density (Icorr) decreased by 52% after heat treatment at 1100 °C, which was comparable with that of wrought Inconel 625 alloy. Detailed microstructural examination demonstrated the recrystallization occurred with the dissolution of Laves and δ phases, weakening of 〈001〉 orientation, decrease of low angle grain boundaries and formation of large numbers of stable twin grain boundaries. All the evolution of the crystal and microstructure contributed to the striking corrosion resistance of the 1100 °C heat-treated Inconel 625 alloy.