For the purpose of identifying enantiomeric impurities in the drug substance and pharmaceutical dosage forms of the novel anti-TB medication pretomanid, an RP-high-performance liquid chromatography method was devised. To ensure… Click to show full abstract
For the purpose of identifying enantiomeric impurities in the drug substance and pharmaceutical dosage forms of the novel anti-TB medication pretomanid, an RP-high-performance liquid chromatography method was devised. To ensure the robustness of the optimized approach, analytical quality by design was used. Studies on factor screening and risk evaluation helped pinpoint the critical method parameters (CMPs); resolution (R1), analyte retention time (R2) and tailing factor (R3) are those terms. Pareto charts, half-normal plots, 3D surface plots, 2D contour plots and 3D cube plots were used to study the effects of solo and interactive CMPs on critical analytical attributes. Analysis of variance (ANOVA) was used to verify the technique parameters' confirmation of significance (P = 0.05). With a Chiral Cel OJ-3R (150 × 4.6 mm, 3 µm) and a mobile phase consisting of 20 mM of ammonium trifluoroacetate, pH = 2.5, and acetonitrile in a gradient mode, chromatographic separation was accomplished. At 30°C and 330 nm, the column's temperature and wavelength, respectively, were recorded. The procedure is stability-indicating and is LC-MS compatible. According to the International Conference on Harmonization tripartite guidelines, the method demonstrated appropriate specificity, sensitivity, linearity, accuracy, precision and robustness. The LOD and LOQ were, respectively, 0.09 and 0.3 μg/mL. With a correlation coefficient of >0.990, it was discovered that the established method for enantiomeric impurity was linear over the concentration range of 0.3-2.25μg/mL. The approach exhibits adequate accuracy (%recovery = 85-115%), robustness (%RSD = 5.0) and precision (%RSD = 5.0). The method was also shown to be stability-indicating and was shown to provide effective separation in the presence of degradation products through the use of forced degradation tests.
               
Click one of the above tabs to view related content.