LAUSR

PurposeRecycled fibres used as reinforcements are obtained from garment cut wastes of cotton, polyester and cotton/polyester fabrics to develop these composites. These composites are developed by using Epoxy resin, Kaolinite, Polypropylene sheet as matrices. Reinforcements and matrices have been used in different compositions and combinations to develop these composites. The main advantages of this type of composites are to combine the different properties of different materials to obtain unique and high-performance material.Design/methodology/approachGarment cut wastes from apparel industries are used for various applications in various industries. Normally, garment cut wastes and recycled fibres from garment cut wastes are used in textile, furniture, carpet, paper, automobile, construction and agricultural industries in low mechanical performance applications. In this research, composites are developed by using recycled fibres obtained from garment cut wastes as reinforcement and with different types of matrices.FindingsTechnical properties like thickness, mass per unit area, Tensile strength, Flexural strength, Impact strength, Water absorbency and Scanning Electron Microscope of developed composites were tested and analyzed. The outcome of the results demonstrates that many of the composite proportions with different blend, reinforcement and matrcies show superior mechanical performances when compared with each other, and it can be recommended for many potential applications.Originality/valueThe properties of composites are dependent on the different blend proportions of recycled fibres with reinforcement and matrices. Based on the result of tensile strength, polyester/cotton fibre reinforced composites show superior strength compared to other recycled fibre reinforced samples and it can be suitably tailored further by appropriate design of different lay-up angle and orientation with the number of different preformed layers of reinforcements to suit the intended applications.