Photo from wikipedia
As one kind of filament/staple fiber composite yarn, core spun yarn has been widely used, especially on Jeans. However, there is only one filament in the commonly used core spun… Click to show full abstract
As one kind of filament/staple fiber composite yarn, core spun yarn has been widely used, especially on Jeans. However, there is only one filament in the commonly used core spun yarn, such as spandex, and the performance of the one filament often is influenced during dyeing and finishing. Therefore, in the paper, twin-core spun yarns with two different filaments feeding simultaneously were spun on ring spinning frame modified by one kind of filament feeding numerical control device. The paper aims to discuss these issues.,Four kinds of twin-core spun yarns, cotton/spandex/PBT, cotton/spandex/CM800, cotton/spandex/T400, cotton/spandex/SPH with linear density 36.4tex/40D/50D were spun. For improving the covering effect of the two filaments, the filament feeding position, filament pre-drafting multiple, distance between two staple roving, designed twist factor of the core spun yarn were optimized.,It is shown that comparing with the core spun yarn, the breaking strength and elongation of the twin-core spun yarns are improved since the addition of another elastic filament, while the evenness is a little worse.,By using the twin-core spun yarns, corresponding knitted and woven fabrics are produced. Meanwhile, for simulating the dyeing and finishing process, the knitted fabrics were treated during the 150°C high temperature. It is shown that comparing with the fabrics produced by cotton/spandex yarn, addition of another elastic filament can improve the fabric strength and resistant and has positive effect on worsen prevention for high temperature treated fabric elastic recovery, and on change prevention during the dyeing and finishing process for fabric handle properties, and improves the fabric stability.