LAUSR

Purpose The purpose of this study is to bring out the machining characteristics of abrasive jet machining on carbon fibre reinforced thermoplastic composites utilized in aerospace and biomedical applications. Biocompatibility materials such as carbon fibres and polyether thermoplastics, like polyether ether ketone (PEEK) are widely used in trauma and orthopaedic surgery. Due to the heterogeneity, layered construction of reinforcing phase bonds with a resin matrix and abrasiveness of the reinforcing fibre, traditional drilling of carbon fibre-reinforced composites (CFRPs) are always challenging task. Design/methodology/approach An investigation is carried out using abrasive jet machine for drilling PEEK filled with 30 Wt.% carbon fibre (CF 30) using threaded and unthreaded nozzle to study the effect of abrasive jet process variables on surface roughness (Ra) and delamination factor (DF). Pressure (P) and stand-off distance (SOD) as important technological abrasive jet factors were evaluated. It is found that higher abrasive jet pressure and minimum SOD maybe selected to achieve minimum delamination. Findings The study further reported that the threaded nozzle minimized the surface roughness by 43% and delamination factor up to 12%. Originality/value This study of experimenting and observing the machining characteristics of CF30 by using a threaded nozzle is being tried for the first time and the results are deliberated.