LAUSR

In this study, the tri-bological behaviour of the un-coated and diamond coated tungsten carbide was evaluated using the pin-on-disc test rig. The same was also tested on a lathe machine tool. This paper aims to compare the tri-bological behaviour of coated tungsten carbide pin with un-coated tungsten carbide pin it also correlates the wear obtained from the two machines used.,Experiments were performed using L8 orthogonal array and results obtained on a pin-on-disc test rig under dry sliding process were optimized through a modern optimization technique i.e. genetic algorithm (GA). The response surface methodology model (L8 orthogonal array) formed the basis for the development of the GA model, which defines the conditions of minimum wear, minimum coefficient of friction and minimum surface roughness for the sliding process of the pin-on-disc test rig.,Implementation of the heuristic approach for optimization of input parameters for the combination of tool material used for the turning process. The initial approach involves tri-bological testing considering the same combination. The set of experiments further performed, inferred that the results were similar and that the diamond coating enhances the life of the tool.,Successfully synthesized the diamond coating on tungsten carbide tool material. Implantation of the heuristic approach, i.e. GA to tri-bological tests to identify the optimized level of input variables. Experimentation involves the tri-bological testing whose results were confirmed through performing experiments on the lathe machine tool.